36 lines
2.1 KiB
Plaintext
36 lines
2.1 KiB
Plaintext
|
Base:
|
||
|
|
1. Place the left body panel flat with the magnet holes down.
|
||
|
|
2. Take the bottom body panel, and attach the back panel to it using 1x M4x12 countersunk screw, and 1x M4 nut.
|
||
|
|
4. Take the front body panel, and attach it to the bottom panel
|
||
|
|
5. Place this assembly onto the left side panel, and attach it with 1x M4x12 countersunk screw, and 2x M4 nut.
|
||
|
|
|
||
|
|
Controls:
|
||
|
|
1. Take the control panel base and cover.
|
||
|
|
2. Prior to attaching it to the base assembly, attach the joystick using 4x M5x20 Carriage Bolt inserted from the top, and 4x M5 flanged nuts.
|
||
|
|
3. Attach the buttons to the control panel assembly using their attached nuts.
|
||
|
|
4. Ensure parts are oriented with the wire connections towards the back of the cabinet.
|
||
|
|
5. Attach their wires.
|
||
|
|
6. Take the control support panel, and attach it to the bottom of the control panel.
|
||
|
|
7. Fasten this to the base using 2x M4x12 countersunk screw, and 2x M4 nut.
|
||
|
|
|
||
|
|
Display:
|
||
|
|
1. Place the screen face down on its foam protector.
|
||
|
|
2. Attach the Raspberry Pi to the screens inner mounting holes using 4x M2.5x5 standoffs, and 4x M2.5x5 socket head screws.
|
||
|
|
3. Install 4x M2.5x25 standoffs into the screens outer mounting holes.
|
||
|
|
4. Attach the display mounting panel to the display using 4x M2.5x5 socket head screws, and 8x M2.5 washers, with one washer on each side of the mounting panel.
|
||
|
|
5. Keep each screw loose until all 4 are attached, then tighten.
|
||
|
|
6. Place display assembly onto the side panel, and fasten with 1x M4x12 countersunk screw, and 2x M4 nut.
|
||
|
|
|
||
|
|
Speakers:
|
||
|
|
1. Attach speakers to speaker panel using ________________
|
||
|
|
2. place speaker panel, and display cover together, then insert into the side panel.
|
||
|
|
|
||
|
|
Marquee:
|
||
|
|
1. Attach the lights to marquee back panel.
|
||
|
|
2. Insert the marquee back, and marquee front panels into the top panel.
|
||
|
|
3. Attach the assembly to the side panel using 2x M4x12 countersunk screw, and 2x M4 nut.
|
||
|
|
|
||
|
|
Sides:
|
||
|
|
1. Attach the right side panel to the rest of the assembly using 5x M4x12 countersunk screw, and 5x M4 nut.
|
||
|
|
2. Some of the nut slots can be hard to reach, so you may want to stand up the cabinet once you have the tabs inserted into the right panel.
|
||
|
|
3. Attach the side covers using the magnets.
|