TTL/Arcade_Cabinet
2
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
Qmodo committed 2024-07-19 13:16:36 -04:00
commit 7c1385d681
29 files changed
+3719897
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

Instructions.txt
+36
View File
@@ -0,0 +1,36 @@
Base:
1. Place the left body panel flat with the magnet holes down.
2. Take the bottom body panel, and attach the back panel to it using 1x M4x12 countersunk screw, and 1x M4 nut.
4. Take the front body panel, and attach it to the bottom panel
5. Place this assembly onto the left side panel, and attach it with 1x M4x12 countersunk screw, and 2x M4 nut.
Controls:
1. Take the control panel base and cover.
2. Prior to attaching it to the base assembly, attach the joystick using 4x M5x20 Carriage Bolt inserted from the top, and 4x M5 flanged nuts.
3. Attach the buttons to the control panel assembly using their attached nuts.
4. Ensure parts are oriented with the wire connections towards the back of the cabinet.
5. Attach their wires.
6. Take the control support panel, and attach it to the bottom of the control panel.
7. Fasten this to the base using 2x M4x12 countersunk screw, and 2x M4 nut.
Display:
1. Place the screen face down on its foam protector.
2. Attach the Raspberry Pi to the screens inner mounting holes using 4x M2.5x5 standoffs, and 4x M2.5x5 socket head screws.
3. Install 4x M2.5x25 standoffs into the screens outer mounting holes.
4. Attach the display mounting panel to the display using 4x M2.5x5 socket head screws, and 8x M2.5 washers, with one washer on each side of the mounting panel.
5. Keep each screw loose until all 4 are attached, then tighten.
6. Place display assembly onto the side panel, and fasten with 1x M4x12 countersunk screw, and 2x M4 nut.
Speakers:
1. Attach speakers to speaker panel using ________________
2. place speaker panel, and display cover together, then insert into the side panel.
Marquee:
1. Attach the lights to marquee back panel.
2. Insert the marquee back, and marquee front panels into the top panel.
3. Attach the assembly to the side panel using 2x M4x12 countersunk screw, and 2x M4 nut.
Sides:
1. Attach the right side panel to the rest of the assembly using 5x M4x12 countersunk screw, and 5x M4 nut.
2. Some of the nut slots can be hard to reach, so you may want to stand up the cabinet once you have the tabs inserted into the right panel.
3. Attach the side covers using the magnets.