adding microcontroller description, programming AVR mc
This commit is contained in:
parent
a051404135
commit
57a3228465
@ -32,3 +32,77 @@ An **H-bridge** is a circuit used to control the **direction** of a DC motor. It
|
||||
Because N-channel MOSFETs conduct easily when their **gate voltage is higher than the source**, they're ideal for **low-side switching**. High-side use may require **gate driver circuits** to boost voltage.
|
||||
|
||||
---
|
||||
# 🔥 Difference Between P-Channel and N-Channel MOSFETs
|
||||
|
||||
MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors) are used to switch and amplify electronic signals.
|
||||
There are two main types: **N-Channel** and **P-Channel**.
|
||||
Each has different behaviors and is suited to different roles in circuits.
|
||||
|
||||
---
|
||||
|
||||
## 🧲 N-Channel MOSFET
|
||||
|
||||
### 🔍 Characteristics:
|
||||
- **Current flows** from **Drain to Source** when turned ON.
|
||||
- **Turns ON** when the **Gate voltage (Vgs)** is **positive** relative to the Source.
|
||||
- **Lower ON-resistance** (better conductivity) compared to P-Channel for the same size.
|
||||
- **Preferred for switching low-side** (between load and ground).
|
||||
|
||||
### ✅ Strengths:
|
||||
- Higher efficiency
|
||||
- Faster switching
|
||||
- Lower cost (per performance level)
|
||||
|
||||
### ❌ Weaknesses:
|
||||
- Usually requires extra circuitry (like level shifters) when used for high-side switching (above the load).
|
||||
|
||||
### 🧠 Common Uses:
|
||||
- Low-side switches
|
||||
- Buck converters
|
||||
- Motor controllers (low-side drivers)
|
||||
|
||||
---
|
||||
|
||||
## 🧲 P-Channel MOSFET
|
||||
|
||||
### 🔍 Characteristics:
|
||||
- **Current flows** from **Source to Drain** when turned ON.
|
||||
- **Turns ON** when the **Gate voltage (Vgs)** is **negative** relative to the Source.
|
||||
- **Typically higher ON-resistance** and **slower** compared to N-Channel MOSFETs.
|
||||
- **Preferred for switching high-side** (between power source and load).
|
||||
|
||||
### ✅ Strengths:
|
||||
- Simplifies high-side switching (easy to control with low voltages)
|
||||
- Useful when you need to disconnect the positive voltage rail.
|
||||
|
||||
### ❌ Weaknesses:
|
||||
- Less efficient (higher resistance)
|
||||
- Larger physical size for the same current handling compared to N-Channel.
|
||||
|
||||
### 🧠 Common Uses:
|
||||
- High-side switches
|
||||
- Power management circuits
|
||||
- Battery protection circuits
|
||||
|
||||
---
|
||||
|
||||
# ⚡ Quick Comparison Table
|
||||
|
||||
| Feature | N-Channel | P-Channel |
|
||||
|----------------------------|-----------------------------------|------------------------------------|
|
||||
| Current Direction | Drain → Source | Source → Drain |
|
||||
| Turn-On Condition (Vgs) | Positive | Negative |
|
||||
| Efficiency | Higher | Lower |
|
||||
| Typical Placement | Low-side (GND side) switching | High-side (VCC side) switching |
|
||||
| Complexity for High-Side | Needs extra circuitry (bootstrap) | Simple control |
|
||||
|
||||
---
|
||||
|
||||
# 🎯 Final Thoughts
|
||||
|
||||
- **Use N-Channel** when you want **higher efficiency and lower cost**, especially on the low side.
|
||||
- **Use P-Channel** when you need a **simple high-side switch** without complicated control circuitry.
|
||||
- In many advanced designs, engineers prefer **two N-Channel MOSFETs** (with extra drivers) even for high-side switching to maximize efficiency.
|
||||
|
||||
Choosing the right type depends on your circuit's needs! 🚀
|
||||
|
||||
|
||||
262
week3/microcontrollers.md
Normal file
262
week3/microcontrollers.md
Normal file
@ -0,0 +1,262 @@
|
||||
# 🔥 Overview of Common Microcontroller Families
|
||||
|
||||
Microcontrollers (MCUs) are the tiny brains embedded in countless devices — from microwaves to drones. Different families of microcontrollers are optimized for different needs like power efficiency, performance, or ease of use.
|
||||
|
||||
Below is a breakdown of some of the **most common microcontroller families** used in hobbyist, industrial, and commercial applications.
|
||||
|
||||
---
|
||||
|
||||
## 🏠 AVR Family (by Atmel / Microchip)
|
||||
|
||||
### 🔍 Overview:
|
||||
- 8-bit RISC microcontrollers
|
||||
- Known for simplicity and wide adoption in hobbyist communities (especially via Arduino)
|
||||
|
||||
### ✅ Key Features:
|
||||
- Low power consumption
|
||||
- Easy to program (especially via Arduino IDE)
|
||||
- Popular models: **ATmega328P** (Arduino Uno), **ATtiny85**
|
||||
|
||||
### 🧠 Common Uses:
|
||||
- Prototyping
|
||||
- DIY electronics
|
||||
- Basic automation and control systems
|
||||
|
||||
---
|
||||
|
||||
## 🏗️ ARM Cortex-M Family (by ARM Holdings)
|
||||
|
||||
### 🔍 Overview:
|
||||
- 32-bit processors licensed by ARM to many manufacturers (like STMicroelectronics, NXP, Nordic, Raspberry Pi)
|
||||
- Offers a broad range of performance and power options (M0+, M3, M4, M7, M33)
|
||||
|
||||
### ✅ Key Features:
|
||||
- High performance at low power
|
||||
- Rich set of peripherals (USB, CAN, Ethernet)
|
||||
- Scalable across simple to high-end applications
|
||||
|
||||
### 🧠 Common Uses:
|
||||
- IoT devices
|
||||
- Wearable tech
|
||||
- Robotics and embedded systems
|
||||
|
||||
---
|
||||
|
||||
## 📡 ESP Family (by Espressif Systems)
|
||||
|
||||
### 🔍 Overview:
|
||||
- Wi-Fi and Bluetooth-enabled microcontrollers, built for wireless communication and IoT.
|
||||
|
||||
### ✅ Key Features:
|
||||
- Built-in Wi-Fi and BLE (Bluetooth Low Energy)
|
||||
- Affordable and powerful
|
||||
- Models: **ESP8266**, **ESP32**
|
||||
|
||||
### 🧠 Common Uses:
|
||||
- Home automation
|
||||
- Wireless sensors
|
||||
- Cloud-connected devices
|
||||
|
||||
---
|
||||
|
||||
## 🔌 PIC Family (by Microchip)
|
||||
|
||||
### 🔍 Overview:
|
||||
- One of the oldest and most stable MCU lines; known for industrial robustness.
|
||||
|
||||
### ✅ Key Features:
|
||||
- Wide voltage and temperature ranges
|
||||
- Available from 8-bit to 32-bit (PIC32)
|
||||
- Rich in peripherals for timers, PWM, ADC
|
||||
|
||||
### 🧠 Common Uses:
|
||||
- Industrial controllers
|
||||
- Automotive applications
|
||||
- Consumer electronics
|
||||
|
||||
---
|
||||
|
||||
## 💾 MSP430 Family (by Texas Instruments)
|
||||
|
||||
### 🔍 Overview:
|
||||
- 16-bit microcontrollers optimized for ultra-low power consumption.
|
||||
|
||||
### ✅ Key Features:
|
||||
- Extremely low standby power draw
|
||||
- Ideal for battery-powered systems
|
||||
- Good selection of analog peripherals
|
||||
|
||||
### 🧠 Common Uses:
|
||||
- Smart meters
|
||||
- Wearable health devices
|
||||
- Portable instrumentation
|
||||
|
||||
---
|
||||
|
||||
## 🧩 RP2040 Family (by Raspberry Pi)
|
||||
|
||||
### 🔍 Overview:
|
||||
- Raspberry Pi’s first custom silicon MCU, focused on flexibility and performance.
|
||||
|
||||
### ✅ Key Features:
|
||||
- Dual-core ARM Cortex-M0+ at 133MHz
|
||||
- Unique Programmable I/O (PIO) blocks for custom hardware interfaces
|
||||
- Affordable and widely available
|
||||
|
||||
### 🧠 Common Uses:
|
||||
- Prototyping and education
|
||||
- IoT edge devices
|
||||
- Hobbyist projects
|
||||
|
||||
---
|
||||
|
||||
# 🔍 Quick Summary Table
|
||||
|
||||
| Family | Architecture | Strengths | Typical Use |
|
||||
|----------------|----------------|-----------------------------|---------------------------------|
|
||||
| AVR | 8-bit | Simplicity, easy learning | DIY, education |
|
||||
| ARM Cortex-M | 32-bit | Performance, flexibility | Industrial, IoT, robotics |
|
||||
| ESP (ESP32) | 32-bit | Wireless communication | Home automation, IoT |
|
||||
| PIC | 8/16/32-bit | Robustness, broad options | Automotive, industrial control |
|
||||
| MSP430 | 16-bit | Ultra-low power | Battery-powered devices |
|
||||
| RP2040 | 32-bit | Custom I/O, affordability | Prototyping, hobbyist projects |
|
||||
|
||||
---
|
||||
|
||||
Each microcontroller family has carved out a niche depending on whether you need **low cost**, **low power**, **high connectivity**, or **processing power**. Choosing the right MCU depends heavily on your project's specific needs. 🚀🔧
|
||||
|
||||
---
|
||||
# 🔥 Flashing and Programming an AVR Microcontroller (e.g., ATtiny)
|
||||
|
||||
Flashing an AVR-based microcontroller like an **ATtiny** involves **uploading your compiled firmware (program)** into its memory so that it can run the code you wrote.
|
||||
|
||||
Here's a step-by-step breakdown of the process:
|
||||
|
||||
---
|
||||
|
||||
## 🧰 1. What You Need
|
||||
|
||||
### Hardware:
|
||||
- **ATtiny microcontroller** (e.g., ATtiny85, ATtiny84)
|
||||
- **Programmer device** (examples):
|
||||
- **USBasp** (popular and cheap)
|
||||
- **AVRISP mkII** (official programmer)
|
||||
- **Arduino-as-ISP** (use an Arduino Uno as a programmer)
|
||||
- **Breadboard and jumper wires** (for prototyping)
|
||||
- **Capacitors** (optional, for stability)
|
||||
|
||||
### Software:
|
||||
- **AVRDUDE** (command-line utility to communicate with AVR chips)
|
||||
- **Arduino IDE** or **Atmel Studio** (for writing and compiling code)
|
||||
- Optional: **AVR Programmer GUI** tools like **AVRDUDESS** (for easier use)
|
||||
|
||||
---
|
||||
|
||||
## 🧩 2. Connect the Programmer to the ATtiny
|
||||
|
||||
The key pins you must connect are based on the **ISP (In-System Programming)** protocol:
|
||||
|
||||
| ATtiny Pin | Connects To | Purpose |
|
||||
|------------|-------------|--------------------|
|
||||
| VCC | 5V | Power |
|
||||
| GND | Ground | Ground |
|
||||
| RESET | Programmer | Reset control |
|
||||
| MOSI | Programmer | Data input to MCU |
|
||||
| MISO | Programmer | Data output from MCU|
|
||||
| SCK | Programmer | Clock line |
|
||||
|
||||
**Tip:** Double-check the ATtiny datasheet for the exact pinout (it varies between ATtiny models).
|
||||
|
||||
---
|
||||
|
||||
## 🖥️ 3. Install and Configure Your Software
|
||||
|
||||
If using **Arduino IDE**:
|
||||
|
||||
- Install **ATtiny Board Support** via the Boards Manager.
|
||||
- Select:
|
||||
- **Board**: ATtiny model (e.g., ATtiny85)
|
||||
- **Clock**: Internal 8 MHz or whatever is appropriate
|
||||
- **Programmer**: (e.g., "USBasp" or "Arduino as ISP")
|
||||
|
||||
If using **AVRDUDE** directly:
|
||||
|
||||
- Prepare a **HEX file** (compiled firmware).
|
||||
- Use command-line commands to flash it.
|
||||
|
||||
Example `avrdude` command:
|
||||
```bash
|
||||
avrdude -c usbasp -p t85 -U flash:w:your_program.hex:i
|
||||
```
|
||||
Where:
|
||||
|
||||
-c usbasp: Specifies the programmer type
|
||||
|
||||
-p t85: Specifies the target device (ATtiny85)
|
||||
|
||||
-U flash:w:your_program.hex:i: Write firmware to flash memory
|
||||
|
||||
## 🚀 4. Flash (Upload) Your Program
|
||||
|
||||
Once the setup is correct:
|
||||
|
||||
Hit Upload in Arduino IDE
|
||||
|
||||
Or run the AVRDUDE command manually
|
||||
|
||||
The programmer will transfer the compiled program into the microcontroller’s flash memory.
|
||||
|
||||
Success! 🎉 Your ATtiny will now start running your code.
|
||||
|
||||
## 🛠️ 5. (Optional) Burning Fuses
|
||||
|
||||
Fuses configure low-level options like:
|
||||
|
||||
Clock source (internal/external)
|
||||
|
||||
Brown-out detection
|
||||
|
||||
Watchdog timers
|
||||
|
||||
Setting fuses incorrectly can "brick" the chip temporarily (you may need High-Voltage programming to recover it).
|
||||
|
||||
In Arduino IDE:
|
||||
|
||||
Use "Burn Bootloader" to set the fuses according to the clock configuration.
|
||||
|
||||
In AVRDUDE:
|
||||
|
||||
avrdude -c usbasp -p t85 -U lfuse:w:0xE2:m -U hfuse:w:0xDF:m
|
||||
(Values depend on your needs.)
|
||||
|
||||
## 🧠 Summary Workflow
|
||||
|
||||
Connect the programmer to the ATtiny correctly.
|
||||
|
||||
Write your code in Arduino IDE (or another environment).
|
||||
|
||||
Compile and prepare the firmware.
|
||||
|
||||
Upload (flash) the firmware using the programmer.
|
||||
|
||||
(Optional) Set fuses if you need custom behavior.
|
||||
|
||||
## ⚡ Quick Tips
|
||||
|
||||
Double-check wiring — most flashing errors come from wrong connections!
|
||||
|
||||
Ensure proper power — not all programmers supply 5V.
|
||||
|
||||
Use a capacitor (10μF between RESET and GND on Arduino-as-ISP setups) to avoid auto-reset.
|
||||
|
||||
Stay calm — AVR microcontrollers are resilient and recoverable! 🧘
|
||||
|
||||
## 🎯 Final Thoughts
|
||||
|
||||
Programming an AVR chip like the ATtiny opens up a world of custom embedded possibilities. Once you get comfortable with flashing and fuse settings, you can create highly optimized, tiny, and efficient systems.
|
||||
|
||||
It's a fantastic skill for hobbyists, engineers, and tinkerers alike. 🚀
|
||||
|
||||
---
|
||||
|
||||
https://youtu.be/AL9vK_xMt4E?si=o2ikpwGOgRzlF3Wl
|
||||
Loading…
Reference in New Issue
Block a user