<?xml version="1.0" encoding="UTF-8"?>
<LightBurnLibrary>
    <Material name="(Fabric) Canvas">
        <Entry Thickness="0.8000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Fabric) Canvas/0.8000/Cut"/>
                <minPower Value="1"/>
                <maxPower Value="50"/>
                <maxPower2 Value="20"/>
                <speed Value="100"/>
                <dotTime Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Fabric) Canvas/-1.0000/Engrave"/>
                <minPower Value="1"/>
                <maxPower Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <dotTime Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="(Fabric) Cotton">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Fabric) Cotton/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="38"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="1.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Fabric) Cotton/1.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="300"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Fabric) Cotton/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="300"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="(Fabric) Denim">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Fabric) Denim/-1.0000/Engrave"/>
                <minPower Value="13"/>
                <maxPower Value="13"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="1.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Fabric) Denim/1.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="300"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="(Plywood) Baltic Birch">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Plywood) Baltic Birch/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="25"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.086"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Plywood) Baltic Birch/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="45"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="6.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Plywood) Baltic Birch/6.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="13"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="9.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Plywood) Baltic Birch/9.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="9"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="12.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Plywood) Baltic Birch/12.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="6"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="15.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Plywood) Baltic Birch/15.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="2"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="(Plywood) Birch">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Plywood) Birch/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="25"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Plywood) Birch/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="45"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="6.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Plywood) Birch/6.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="13"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="10.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Plywood) Birch/10.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="8"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="(Wood) Bamboo">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Wood) Bamboo/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="38"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Wood) Bamboo/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="17"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="5.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Wood) Bamboo/5.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="12"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="6.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Wood) Bamboo/6.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="10"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="(Wood) Cherry">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Wood) Cherry/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="38"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Wood) Cherry/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="46"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="8.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="(Wood) Cherry/8.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="8"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Acrylic">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Acrylic/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="38"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Acrylic/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="37"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="5.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Acrylic/5.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="15"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="6.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Acrylic/6.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="12"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="9.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Acrylic/9.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="5"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="10.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Acrylic/10.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="5"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="12.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Acrylic/12.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="2"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="-1.0000" Desc="Etch Light">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Acrylic/-1.0000/Etch Light"/>
                <minPower Value="10"/>
                <maxPower Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="90"/>
                <dotTime Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="-1.0000" Desc="Etch Dark">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Acrylic/-1.0000/Etch Dark"/>
                <minPower Value="10"/>
                <maxPower Value="50"/>
                <maxPower2 Value="20"/>
                <speed Value="80"/>
                <dotTime Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="-1.0000" Desc="Deep">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Acrylic/-1.0000/Deep"/>
                <minPower Value="1"/>
                <maxPower Value="85"/>
                <maxPower2 Value="20"/>
                <speed Value="450"/>
                <dotTime Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Anodized Aluminum">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Anodized Aluminum/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="40"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Brand Specific">
        <Entry Thickness="-1.0000" Desc="Engrave" NoThickTitle="Petzl">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Brand Specific/Petzl/Engrave"/>
                <minPower Value="15"/>
                <maxPower Value="30"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <crossHatch Value="1"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="-1.0000" Desc="Engrave" NoThickTitle="YETI">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Brand Specific/YETI/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="45"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Cardboard">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Cardboard/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="38"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Cardboard/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="30"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="4.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Cardboard/4.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="22"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="6.5000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Cardboard/6.5000/Cut"/>
                <minPower Value="60"/>
                <maxPower Value="75"/>
                <maxPower2 Value="20"/>
                <speed Value="30"/>
                <numPasses Value="2"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Cardboards">
        <Entry Thickness="6.0000" Desc="Cut">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Cardboards/6.0000/Cut"/>
                <minPower Value="50"/>
                <maxPower Value="50"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <overscan Value="0"/>
                <interval Value="0.0847"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Ceramic">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Ceramic/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="88"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Coated Metals">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Coated Metals/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="63"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Cork">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Cork/-1.0000/Engrave"/>
                <minPower Value="13"/>
                <maxPower Value="25"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Cork/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="175"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Delrin">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Delrin/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="50"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="1.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Delrin/1.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="100"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Delrin/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="15"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="5.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Delrin/5.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="7"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="EVA Foam">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="EVA Foam/-1.0000/Engrave"/>
                <minPower Value="13"/>
                <maxPower Value="13"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="2.0000" Desc="Cut">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="EVA Foam/2.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="70"/>
                <maxPower2 Value="20"/>
                <speed Value="60"/>
                <numPasses Value="2"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="EVA Foam/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="70"/>
                <maxPower2 Value="20"/>
                <speed Value="60"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="5.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="EVA Foam/5.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="70"/>
                <maxPower2 Value="20"/>
                <speed Value="50"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="6.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="EVA Foam/6.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="70"/>
                <maxPower2 Value="20"/>
                <speed Value="40"/>
                <numPasses Value="2"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="8.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="EVA Foam/8.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="75"/>
                <maxPower2 Value="20"/>
                <speed Value="40"/>
                <numPasses Value="2"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="10.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="EVA Foam/10.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="45"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="12.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="EVA Foam/12.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="75"/>
                <maxPower2 Value="20"/>
                <speed Value="40"/>
                <runBlower Value="0"/>
                <numPasses Value="2"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Fiberglass">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Fiberglass/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="50"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="1.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Fiberglass/1.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="1"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Glass">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Glass/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="70"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Leather">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Leather/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="38"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="1.5000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Leather/1.5000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="63"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Leather/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="28"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="MDF">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="MDF/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="MDF/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="26"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="6.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="MDF/6.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="17"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="9.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="MDF/9.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="8"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="10.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="MDF/10.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="5"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="12.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="MDF/12.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="2"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Melamine">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Melamine/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="38"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="1.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Melamine/1.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="26"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Melamine/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="80"/>
                <maxPower2 Value="20"/>
                <speed Value="14"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.086"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="6.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Melamine/6.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="80"/>
                <maxPower2 Value="20"/>
                <speed Value="5"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.086"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Mother of Pearl">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Mother of Pearl/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="63"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Engrave">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Mother of Pearl/3.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="75"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Mylar">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Mylar/-1.0000/Engrave"/>
                <minPower Value="25"/>
                <maxPower Value="25"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="1.5000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Mylar/1.5000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="52"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Paper">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Paper/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.1000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Paper/0.1000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.08"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.6000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Paper/0.6000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="300"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Rubber">
        <Entry Thickness="-1.0000" Desc="Stamp Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Rubber/-1.0000/Stamp Engrave"/>
                <minPower Value="25"/>
                <maxPower Value="100"/>
                <maxPower2 Value="20"/>
                <speed Value="200"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.064"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="1.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Rubber/1.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="80"/>
                <maxPower2 Value="20"/>
                <speed Value="40"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.086"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="2.3000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Rubber/2.3000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="90"/>
                <maxPower2 Value="20"/>
                <speed Value="26"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Rubber/3.0000/Cut"/>
                <minPower Value="10"/>
                <maxPower Value="80"/>
                <maxPower2 Value="20"/>
                <speed Value="30"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <scanOpt Value="individual"/>
                <overscan Value="0"/>
                <interval Value="0.086"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Tile">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Tile/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="50"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="marble">
        <Entry Thickness="-1.0000" Desc="Engrave">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="marble/-1.0000/Engrave"/>
                <minPower Value="10"/>
                <maxPower Value="40"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <runBlower Value="0"/>
                <dotTime Value="1"/>
                <scanOpt Value="byGroup"/>
                <interval Value="0.085"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
</LightBurnLibrary>